Traffic Shaper

STATE: unstable

TESTS: shaper_pipe | shaper_queue | shaper_rule

API Docs: Core - Traffic Shaper

Service Docs: Traffic Shaping

Info

The description is used to match the configured entries with the existing ones. It must be unique!

Interfaces for ‘shaper_rules’ must be provided as used in the network config (p.e. ‘opt1’ instead of ‘DMZ’)

per example see menu: ‘Interface - Assignments - Interface ID (in brackets)’
this brings problems if the interface-names are not the same on both nodes when using HA-setups

Definition

For basic parameters see: Basics

ansibleguy.opnsense.shaper_pipe

Parameter	Type	Required	Default value	Aliases	Comment
description	string	true	-	desc	Description for the pipe - will be used to identify the entry. It must be unique!
bandwidth	int	false for state changes, else true	-	bw	Bandwidth limit for the pipe - used in combination with ‘bw_metric’
bandwidth_metric	string	false	Mbit	bw_metric	Metric of the provided bandwidth - one of: ‘bit’, ‘Kbit’, ‘Mbit’, ‘Gbit’
queue	int	false	-	-	Integer between 2 and 100
mask	string	false	-	-	One of: ‘none’, ‘src-ip’, ‘dst-ip’. Dynamic pipe creation by source or destination address. Choose destination to give every IP in destination field of rules the specified bandwidth. A pipe with 1Mbit e.g. would let 3 clients lend 1Mbit each so 3Mbit max. Normally this is used for download pipes. Choose source to give every IP in the source field of rules the specified bandwidth. Normally this is used for upload pipes. Leave this value empty if you want to create a pipe with a fixed bandwidth.
scheduler	string	false	-	-	One of: ‘fifo’, ‘rr’, ‘qfq’, ‘fq_codel’, ‘fq_pie’
delay	int	false	-	-	Integer between 1 and 3000
pie_enable	boolean	false	false	-	Enable PIE active queue management
codel_enable	boolean	false	false	-	Enable CoDel active queue management
codel_ecn_enable	boolean	false	false	-
codel_target	int	false	-	-	Integer between 1 and 10000
codel_interval	int	false	-	-	Integer between 1 and 10000
fqcodel_quantum	int	false	-	-	Integer between 1 and 65535
fqcodel_limit	int	false	-	-	Integer between 1 and 65535
fqcodel_flows	int	false	-	-	Integer between 1 and 65535
buckets	int	false	-	-	Integer between 1 and 65535

ansibleguy.opnsense.shaper_queue

Parameter	Type	Required	Default value	Aliases	Comment
description	string	true	-	desc	Description for the queue - will be used to identify the entry. It must be unique!
pipe	string	false for state changes, else true	-	-	Pipe to link to the queue
weight	string	false for state changes, else true	-	-	Integer between 1 and 100
mask	string	false	-	-	One of: ‘none’, ‘src-ip’, ‘dst-ip’. Dynamic queue creation by source or destination address. Choose destination to evenly share every IP in destination field of rules the specified bandwidth. A pipe with 1Mbit e.g. would let 4 clients lend 250Kbit each. Normally this is used for download queues. Choose source to evenly share every IP in the source field of rules the specified bandwidth. Normally this is used for upload queues. Leave this value empty if you want to specify multiple queues with different weights.
pipe	string	false for state changes, else true	-	-	Pipe to link to the queue
pie_enable	boolean	false	false	-	Enable PIE active queue management
codel_enable	boolean	false	false	-	Enable CoDel active queue management
codel_ecn_enable	boolean	false	false	-
codel_target	int	false	-	-	Integer between 1 and 10000
codel_interval	int	false	-	-	Integer between 1 and 10000
buckets	int	false	-	-	Integer between 1 and 65535

ansibleguy.opnsense.shaper_rule

Parameter	Type	Required	Default value	Aliases	Comment
description	string	true	-	desc	Description for the rule - will be used to identify the entry. It must be unique!
target_pipe	string	true, false if ‘target_queue’ provided	-	pipe	Pipe to link to the rule, alternative to ‘target_queue’
target_queue	string	true, false if ‘target_pipe’ provided	-	queue	Pipe to link to the rule, alternative to ‘target_pipe’
sequence	int	false	-	seq	Integer between 1 and 1000000
interface	string	false	‘lan’	int, i	Matching packets traveling to/from interface
interface2	string	false	-	int2, i2	Secondary interface, matches packets traveling to/from interface (1) to/from interface (2). can be combined with direction.
protocol	string	false	-	proto, p	Protocol like ‘ip’, ‘ipv4’, ‘tcp’, ‘udp’ and so on - for options see the WEB-UI
max_packet_length	int	false	-	max_packet_len, packet_len, iplen	Integer between 2 and 65535
source_invert	boolean	false	false	si, src_inv, src_not	Inverted matching of the source
source_net	string	false	‘any’	s, src, source	Host, network or ‘any’, alias not supported
source_port	string	false	-	sp, src_port	Leave empty to allow all, alias not supported
destination_invert	boolean	false	false	di, dest_inv, dest_not	Inverted matching of the destination
destination_net	string	false	‘any’	d, dest, destination	Host, network or ‘any’, alias not supported
destination_port	string	false	-	dp, dest_port	Leave empty to allow all, alias not supported
dscp	list	false	-	-	One or multiple DSCP values - one of: ‘be’, ‘ef’, ‘af11’, ‘af12’, ‘af13’, ‘af21’, ‘af22’, ‘af23’, ‘af31’, ‘af32’, ‘af33’, ‘af41’, ‘af42’, ‘af43’, ‘cs1’, ‘cs2’, ‘cs3’, ‘cs4’, ‘cs5’, ‘cs6’, ‘cs7’
direction	string	false	‘both’	-	One of: ‘in’, ‘out’, leave empty for ‘both’

Examples

Pipes

- hosts: localhost
  gather_facts: no
  module_defaults:
    group/ansibleguy.opnsense.all:
      firewall: 'opnsense.template.ansibleguy.net'
      api_credential_file: '/home/guy/.secret/opn.key'

    ansibleguy.opnsense.list:
      target: 'shaper_pipe'

  tasks:
    - name: Example
      ansibleguy.opnsense.shaper_pipe:
        description: 'example'
        bandwidth: 50
        # bandwidth_metric: 'Mbit'
        # queue: 50
        # mask: 'none'
        # buckets: 100
        # pie_enable: false
        # codel_enable: false
        # codel_ecn_enable: false
        # codel_target: 100
        # codel_interval: 100
        # fqcodel_quantum: 100
        # fqcodel_limit: 100
        # fqcodel_flows: 100
        # delay: 100
        # enabled: true
        # debug: false
        # state: 'present'

    - name: Adding pipe
      ansibleguy.opnsense.shaper_pipe:
        description: 'test1'
        bandwidth: 50

    - name: Disabling pipe
      ansibleguy.opnsense.shaper_pipe:
        description: 'test1'
        bandwidth: 50
        enabled: false

    - name: Listing pipes
      ansibleguy.opnsense.list:
        target: 'shaper_pipe'
      register: existing_entries

    - name: Printing pipes
      ansible.builtin.debug:
        var: existing_entries.data

    - name: Removing pipe
      ansibleguy.opnsense.shaper_pipe:
        description: 'test1'
        state: 'absent'

Queues

- hosts: localhost
  gather_facts: no
  module_defaults:
    group/ansibleguy.opnsense.all:
      firewall: 'opnsense.template.ansibleguy.net'
      api_credential_file: '/home/guy/.secret/opn.key'

    ansibleguy.opnsense.list:
      target: 'shaper_queue'

  tasks:
    - name: Example
      ansibleguy.opnsense.shaper_queue:
        description: 'example'
        pipe: 'example'
        weight: 50
        # mask: 'none'
        # buckets: 100
        # pie_enable: false
        # codel_enable: false
        # codel_ecn_enable: false
        # codel_target: 100
        # codel_interval: 100
        # enabled: true
        # debug: false
        # state: 'present'

    - name: Adding pipe
      ansibleguy.opnsense.shaper_pipe:
        description: 'testPipe1'
        bandwidth: 50

    - name: Adding queue
      ansibleguy.opnsense.shaper_queue:
        description: 'testQueue1'
        pipe: 'testPipe1'
        weight: 50

    - name: Disabling queue
      ansibleguy.opnsense.shaper_queue:
        description: 'testQueue1'
        pipe: 'testPipe1'
        weight: 50
        enabled: false

    - name: Listing queue
      ansibleguy.opnsense.list:
        target: 'shaper_queue'
      register: existing_entries

    - name: Printing queues
      ansible.builtin.debug:
        var: existing_entries.data

    - name: Removing queues
      ansibleguy.opnsense.shaper_queue:
        description: 'testQueue1'
        state: 'absent'

Rules

- hosts: localhost
  gather_facts: no
  module_defaults:
    group/ansibleguy.opnsense.all:
      firewall: 'opnsense.template.ansibleguy.net'
      api_credential_file: '/home/guy/.secret/opn.key'

    ansibleguy.opnsense.list:
      target: 'shaper_rule'

  tasks:
    - name: Example
      ansibleguy.opnsense.shaper_rule:
        description: 'example'
        target_pipe: 'example'
        target_queue: 'example'
        # sequence: 1
        # interface: 'lan'
        # interface2: 'wan'
        # max_packet_length: 1024
        # protocol: 'ip'
        # source_invert: false
        # source_net: 'any'
        # source_port: 'any'
        # destination_invert: false
        # destination_net: 'any'
        # destination_port: 'any'
        # dscp: ['be']
        # direction: 'in'
        # enabled: true
        # debug: false
        # state: 'present'

    - name: Adding pipe
      ansibleguy.opnsense.shaper_pipe:
        description: 'testPipe1'
        bandwidth: 50

    - name: Adding queue
      ansibleguy.opnsense.shaper_queue:
        description: 'testQueue1'
        pipe: 'testPipe1'
        weight: 50

    - name: Adding rule - link it to queue
      ansibleguy.opnsense.shaper_rule:
        description: 'testRule1'
        target_queue: 'testQueue1'
        protocol: 'tcp'
        destination_port: 80

    - name: Adding rule - link it to pipe
      ansibleguy.opnsense.shaper_rule:
        description: 'testRule2'
        target_pipe: 'testPipe1'
        destination_invert: true
        destination: '172.16.0.0/12'

    - name: Disabling rule
      ansibleguy.opnsense.shaper_rule:
        description: 'testRule1'
        target_queue: 'testQueue1'
        protocol: 'tcp'
        destination_port: 80
        enabled: false

    - name: Listing rules
      ansibleguy.opnsense.list:
        target: 'shaper_rule'
      register: existing_entries

    - name: Printing rules
      ansible.builtin.debug:
        var: existing_entries.data

    - name: Removing rule
      ansibleguy.opnsense.shaper_queue:
        description: 'testRule1'
        state: 'absent'